| Tokyomods Carb Mod / New Modified Carburetor |
| TTokyomods is the originator of four stroke carburetor modifications .The Tokyomods Carb Mod will dramatically improve the performance of your four stroke motocross or off-road machine. We start by completely disassembling and cleaning your entire carburetor, along with inspecting and replacing all damaged or worn parts. The process continues with modifying and installing the Tokyomods jetting specs together with any accessories that the customer requests. Lastly, every unit is bench tested before it’s packaged and shipped out to the customer. The majority of carburetors that Tokyomods modifies have some sort of other pre existing problem; this is why we won’t just sell a "jet kit", Jet kits alone are not enough to keep today’s complex carburetors performing at their best. |
|
Tokyomods Carb Mod $229.95 |
CRF250R New Modified Carburetor $719.95 |
CRF250X New Modified Carburetor $699.95 |
CRF250R New Modified Carburetor with R&D Float Bowl $919.95 |
CRF250X New Modified Carburetor with R&D Float Bowl $899.95 |
|
|
| Tokyomods Fork lock down |
| This the finest lock down system available. Used by factory SX/MX and SuperMoto teams, with the included lower fork guard supports, virtually eliminates any snagging or tearing. This system includes detailed instructions to make installation simple. Manufactured from aircraft grade aluminum and anodized for durability. Available for your CRF250R/X models. |
|
|
|
|
| Engine Vent Kit |
| Eliminate the dirty oily air from getting into your air box!!! The Tokyomods engine Vent kit will allow your engine to breath nothing but clean air, Increasing performance and reliability while eliminating oil from gathering on your air filter. This is a complete kit including red anodized billet air box plug, vent hose, zip tie, and instructions. |
|
|
Engine Vent Kit |
|
Price: $29.95 |
| |
|
| Tokyomods Complete Smog Elimination Kit |
| The new Tokyomods CRF-X smog pump eliminator & engine vent kit is the only kit available to completely remove your stock smog pump and engine vent system. This is a complete kit that includes all parts necessary to do the job right. This kit combined with Tokyomods carb mod and air-box mods will make your CRF250X and 450X feel much closer to the performance of a CRF-R model. |
|
|
Price: $59.95 |
|
|
| Tokyomods Throttle Return Spring |
|
| Is your throttle to stiff? This Tokyomods low tension throttle return spring was designed to reduce the stiff feeling in your Bike or ATV throttle. This custom throttle spring works with any Keihin FCR type Carburetors. This is a great addition to the Tokyomods Carburetor modification. |
|
|
|
|
| Exhaust |
Complete system with titanium PowerBomb header and midpipe; except where noted. Race proven reliability testing, high temp multi-layer packing material and exclusive repack maintenance indicator.
- The lightest full system available.
- Superior power and performance - horsepower improved throughout RPM range.
- Features exclusive proprietary Chamber Core and PowerBomb technology.
- Factory Forward Engineering centralizes mass, improves handling.
- Titanium or Carbon muffler with titanium end caps, midpipe and PowerBomb header.
- Made from premium quality American materials.
- Customize with performance tuning inserts and spark arrestor module.
- Meets AMA sound requirements on most models; inserts available for others. |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
Price: Dual w/ MegaBomb $989.99 |
|
|
| Tokyomods 10 Map Ignition System |
Tokyomods 10 map ignitions are manufactured by Vortex Performance - Inventors of the Dual Curve CDI lead the way again with X10 CDI the smallest and most Powerful Programmable CDI’s available. The X10 CDI allows the user to select up to 10 different power modes as easily as adjusting clickers on your suspension. With the advent of X10 Technology the X10 CDI can be programmed with up to 10 Hi Resolution 3D Maps. This give the user the option to select from a range of power settings and customize the engines power delivery to suit a variety of rider styles, different track conditions, fuel octane levels or engine configurations.
As with the Dual Curve CDI the X10 CDI also allows the rider to change power modes dynamically via a Handlebar Switch.
From Mild to Wild the possibilities are endless with the X10 CDI.
Key Features:
- Pre Programmed with10 selectable power settings via X10 Switch
- Instant Plug in Performance (replaces standard CDI with no mods to wiring required)
- Handlebar Switch for Dynamic Map Selection
- Small for weight saving and ease of mounting
- Rubber Mounting Boot + Brackets supplied (where required)
- V-Boost - Internal Voltage Boost Circuit for maximizing Spark Energy across the entire rev range
- Power Jet Control - Multiple On / Off (where applicable)
- Rev Limiter (where required)
- Re-Programmable
- Race Proven Reliability |
|
$549.95 |
| |
|
| Tokyomods 10 Map Ignition System Programming |
| Do you already have a Vortex ignition and want the exclusive Tokyomods curves? We can do it! Did you get a new 2007 Honda CRF250 and still have your Tokyomods ignition for your 05-06? We can reprogram your old box with the latest maps. |
Price $125.00 |
Order By Phone |
|
| Graphics |
| NEW for 2008. Tokyomods Graphics Available for Honda CRF150R 07-08', CRF250R 04-08', CRF450R 05-08'. This new graphic kit is complete with shrouds, front fender, rear fender, lower fork guards, air box, swing arm and your choice of number plate backgrounds, black for CRF250R and white CRF450R. We can also pre print you name and number on the backgrounds for that factory look. |
|
|
|
Complete Graphic Kit Pre Printed Name & Number: $199.95 |
Shrouds Only $74.95 |
Pre-Printed Numberplates $74.95 |
|
| Engine Parts |
Tokyomods Billet Camshaft
|
|
- Billet Motocross Race Cam $429.95. With fixed cam sprocket. Requires the use of Tokyomods Hi Performance Valve Spring Kit. This cam is for the motocross racer that demands the most from their 250F. With increased bottom, mid, and top end this cam is the best choice for your CRF250.
|
- Billet Motocross Race Cam $429.95. With adjustable cam sprocket. Requires the use of Tokyomods Hi Performance Valve Spring Kit. This cam packs the same punch as the fixed sprocket version and adds the versatility of an adjustable sprocket. This cam is only recommended for the experienced engine builder with the tools and knowledge to install and degree a camshaft.
|
|
Hi Performance Valve Spring Kit $389.95 |
|
| Tokyomods Hi Performance Valve Spring Kits are designed to handle the extreme demands of hi performance racing camshafts. Kits include spring bases, valve springs, and titanium retainers. |
$389.95 |
|
Tokyomods Titanium Racing Valves |
| Tokyomods Titanium Racing Valves are one piece forged titanium, lighter then stock allowing valve train to rev with less effort resulting in increased horsepower. Titanium valves are also precision polished for flawless surface finish, and reduced carbon build up. Tokyomods titanium valves require the use of Tokyomods Copper Alloy valve seats. |
|
Titanium Valves $680 set of 4 |
|
| Tokyomods Stainless Steel off road valves are perfect for the off road rider and racer, they are manufactured from stainless steel and coated with a black nitrate coating to improve air flow and reduce friction. |
|
Stainless Valves $160 set of 4 |
|
Tokyomods Valve Guides |
| Tokyomods valve guides are superior to stock steel guides, they are lighter then stock, dissipate heat from the valve better, and reduce valve drag. |
|
$79.80 set of 4 |
|
Install new Valve Guides and Cut Valve Seats
Price: $199.95 |
| |
Tokyomods Copper-Alloy Valve Seats |
| Tokyomods Copper-Alloy Valve seats are a must when installing titanium valves. They not only dissipate heat from the valve better, they also reduce valve bounce extending valve life. |
|
$199.80 Set of 4 |
|
$129.95 installed each |
| |
Tokyomods Hi Performance Pistons |
| Tokyomods Hi Performance pistons are compatible with oversize valves, higher lift cams and are forged for strength and durability. Pistons are available in a variety of compressions and oversize's. |
|
|
|
Tokyomods Mechanical Cam Chain Tensioner |
| The Tokyomods mechanical cam chain tensioner increases horsepower, extends cam chain and cam chain slider life. In addition to eliminating any possibility of the automatic tensioner failing, causing catastrophic engine failure. It can be installed in minutes with no special tools needed. |
|
$99.95 |
|
Tokyomods Head Porting |
| Tokyomods Head porting is done with the expertise of over 20 years experience of 4 stroke engine building. |
|
$450.00 |
| |
Tokyomods Clutch Springs |
| Increase clutch engagement and clutch life without the super heavy clutch lever feel, these springs are a must for any modern 4-stroke motocrosser. |
|
$59.95 |
|
|
| CV4 Radiator Hose Kits |
|
Price $90.65 |
|
|
|
| Tokyomods Billet Engine Mounts |
| After countless hours of research and development the Tokyomods Billet Engine Mounts are now available. You can now own a true works part for you full size motocross bike. These stiffer Billet aluminum engine mounts will improve the handling of your MX machine. All of the factory teams are using billet machined engine mounts just like these to improve the handling of their works machines, now you can too. |
|
Price: $129.95 |
|
|
