| A: Tokyomods Engine Stand System |
| It's finally here!! The New!! Tokyomods Engine stand system. |
|
|
|
|
|
Complete Tokyomods Engine stand system including:
Bench mount and Roll stand
Price: $859.95 |
| |
|
| |
|
|
Bench mount system $299.95 |
| |
|
| |
|
|
Optional roll stand $599.95 |
| |
|
|
| B: Tappet Tool Set |
|
| These tools are heat treated, and chrome plated for durability. Sold as a set which includes three wrenches - 8mm, 9mm & 10mm and three screw type adjusters - 3mm and 4mm square. The adjusters interchange with the wrenches to allow for 9 different combinations to fit most applications. Graduations on adjusters allow mechanics to adjust valves much quicker. Fits nearly all models of Honda & Suzuki motorcycles and ATVs with screw type adjuster as well as Yamaha SR 185/250, XT/TT 250 & XS 400. |
|
Order Number: 950-TKY- 440 |
Price: $ 49.95 |
| |
|
| C: Keihin/Mikuni Main
Jet Wrench |
With this plastic wrench, you will be
less likely to strip your threads. |
|
Order Number: 002- TKY- 401 |
Price: $2.95 |
| |
|
| D: Positive Stop TDC Tools |
The only accurate way to find TDC! |
|
Order Number:
950- TKY-235 10mm TDC Tool
950-TKY-236 12mm TDC Tool
950-TKY-237 14mm TDC Tool |
Price:$24.95 |
| |
|
| E: Pilot Screw Adjusting Tool |
|
| This new pilot screw adjusting tool was designed to fit into those tight areas on multi-cylinder and single cylinder motorcycles. This unit features a 1" angled head for those hard to reach pilot screws. Length is approximately 17" with a flat slot blade tip. |
Order Number: 950-TKY-406 |
Price: $34.95 |
| |
|
| F: Pilot Screw Adjusting Tool |
Precision made of aircraft grade aluminum & stainless steel. Designed for hard-to-reach areas and pilot air screws on inline fours. Gear Driven 1/4” hex drive
Includes five 1/4” hex bits (all .5” long)-Straight-slot, Phillips, R-shaped pilot screw bit, 6mm hex jet bit & 1/4”-hex-to-1/4”-drive bit. Can be used with any 1/4” or 6mm hex bits.
Max torque is 50 in. Lbs. 17.5” long. |
|
|
Order Number: 950- TKY- 478
|
$99.95 |
|
|
|
|
| G: Tokyomods Honda Camchain Tensioner Tool |
| This is the finest tool on the market for removing and installing stock automatic camchain tensioners on Honda CRF250, CRF450 and TRX450 models. |
|
$69.95 |
|
|
